How To Change Laptop Ip Address Windows 7

Sometimes, it'south ameliorate to assign a PC it'southward own IP address rather than letting your router assign one automatically. Bring together us as nosotros take a await at assigning a static IP address in Windows.

Static vs. Automatic IP Addressing

Right now, the IP addresses for your PCs and other devices are probably assigned automatically past your router using a procotol known equally Dynamic Host Configuration Protocol (DHCP). It's a handy way for devices to connect to your network more hands, because you don't have to configure IP addressing for each new device yourself. The downside to automated addressing is that it'due south possible for a device's IP address to change from fourth dimension to fourth dimension.

Mostly, that's not a big deal, merely at that place are times that you might want a device to have a static, unchanging IP address. For case:

• You lot have a device (similar a home media server, say) that you want to be able to find reliably and you (or other devices) prefer to locate it by IP address. Using IP addresses is often much handier when troubleshooting your network, for example.
• You have certain apps that can but connect to network devices using their IP address. In particular, many older networking apps suffer this limitation.
• You lot forward ports through your router to devices on your network. Some routers play squeamish with port forwarding and dynamic IP addresses; others do not.

Whatever your reason, assigning static IP addresses to devices is not hard, just you do have a choice to make—whether to exercise it from the router or on the device itself.

Assign Static IP Addresses Via Your Router

While this commodity covers assigning static IP addresses to PCs within Windows itself, at that place is another manner to go virtually it. Many routers let yous to assign a pool of IP addresses that are handed out to specific devices (based on the device's physical, or MAC address). This method offers a couple of pregnant advantages:

• IP addresses are even so managed past the router, meaning that you won't take to make (and keep upwardly with) changes on each individual device.
• It'southward easier to assign addresses within the same IP address pool your router uses.

RELATED: How to Set Static IP Addresses On Your Router

This article is most assigning static IP addresses directly to PCs running Windows. We've already got a bully guide on How to Set Static IP Addresses On Your Router, so if that's the mode y'all want to become, exist certain to give it a read.

With all that in mind, though, allow's take a look at how to assign static IP addresses within Windows XP, Vista, 7, 8, and 10.

Set a Static IP Address in Windows 7, viii, or 10

To change the computer's IP address in Windows, yous'll demand to open the "Network Connections" window. Striking Windows+R, type "ncpa.cpl" into the Run box, and then hitting Enter.

In the "Network Connections" window, right-click the adapter for which y'all want to set a static IP accost, and then select the "Properties" command.

In the properties window for the adapter, select "Net Protocol Version iv (TCP/IPv4)" and then click the "Properties" button.

Select the "Use the post-obit IP address" option, and and so type in the IP address, subnet mask, and default gateway that corresponds with your network setup. Next, blazon in your preferred and alternate DNS server addresses. Finally, select the "Validate settings upon exit" option so that Windows immediately checks your new IP accost and respective information to ensure that it works. When y'all're prepare, click the "OK" button.

And then close out of the network adapter's properties window.

Windows automatically runs network diagnostics to verify that the connection is expert. If there are problems, Windows volition give you the option of running the Network troubleshooting magician. Nevertheless, if yous practice run into trouble, the wizard likely won't practice you too much good. It's better to check that your settings are valid and effort once again.

Set a Static IP Address in Windows Vista

Changing your IP from DHCP to a Static address in Vista is like to other versions of Windows, but getting to the correct location is a chip different. Open the Start Menu, right-click on Network, and select Properties.

The Network and Sharing Center opens…click on Manage network connections.

Right-click on the network adapter you lot desire to assign an IP address and click Backdrop.

Highlight Internet Protocol Version four (TCP/IPv4) and then click the Properties push.

At present change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When yous're finished click OK.

Yous'll need to close out of Local Area Connection Properties for the settings to go into event.

Open the Control Prompt and employ the ipconfig control to verify that the changes were successful.

Set a Static IP Address in Windows XP

To set a Static IP in Windows XP, right-click the "My Network Places" icon, and then select "Backdrop."

Right-click the adapter for which you desire to fix the IP, and and so select "Backdrop" from the context menu.

Select the "Internet Protocol (TCP/IP)" entry, and and then click the "Properties" button.

Select the "Utilise the following IP address" choice. Type in the IP address, subnet mask, default gateway, and DNS server addresses you want to use. When you're finished, click the "OK" button.

You will need to close out of the adapter's properties window earlier the changes go into effect.

And you lot can verify your new settings past using the ipconfig control at the command prompt.

---

Generally, it's better to let most of your devices have their IP addresses assigned automatically by your router. Occasionally, though, you might want to set a static IP accost for a particular device. While you can fix static IP addresses directly on your devices (and this article has shown you how to do just that on Windows PCs), we still recommending setting upward static IP addressing on your router if possible. Information technology will just make life easier.

Source: https://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

Posted by: stoneclinking.blogspot.com

Share this post